0 Ifs.errors -- maps internal IFS error codes to strings Copyright Xerox Corporation 1979, 1980, 1981, 1982 Last modified October 3, 1982 12:38 PM by Taft $$1 Virtual memory page $1O is not in any vMem region. $$2 Can't fill request for $1D. pages of vMem. $$3 Too many vMem Buffers - increase maxVMPages in IfsVmem.decl. $$4 Attempted to purge locked page at $1O. $$5 This version of IFS must be run under OS version $1D or newer. $$6 Can't open '$1S' (on the model 31). $$7 Can't open '$1S' (on the trident). $$8 OverlayScan failed. Error code is $1D. $$9 Too many Overlay Entry Points. Increase numOEP in IfsOverlaysInit. $$10 CtxRunning attempted to set lock at $1O multiple times. $$11 CtxRunning does not own the lock at $1O. $$12 SnarfTable is screwed up. $$13 SnarfBuffer failed: no vMem buffers available. (Proceeding will wait a while and retry the Snarf) $$14 smallZone is empty. Block size requested is $1D. words. (Proceeding will allocate the block from bigZone) $$15 bigZone is empty. Block size requested is $1D. words. (Proceeding will cause a vMem buffer to be snarfed) $$16 LoadRam failed. Error code is $1D. $$17 ReturnFrom(CallersFrame()) returned! $$18 Duplicate logical unit. $$19 Can't find logical unit 0. $$20 Can't find enough packs. $$21 Two logical unit 0s. $$22 Can't open 'IFS.Dir'. $$23 User Finish Proc queued before the end of InitIFSPart2. $$24 SwappedOut called -- either a nonresident procedure was called before overlay initialization or else a resident initialization procedure was called after having been discarded. $$25 UnsnarfBuffer called for page $1O, which already belongs to VMem. $$28 Tree at $1O ran out of VMem or made an out-of-bounds reference. $$29 Bad VMEM page alignment or size argument to DOPAGEIO. $$30 Tree at $1O referenced a free page. $$32 Can't find the zoneTable entry for storage block at $1O. $$33 Can't find chunkQ entry for overflow page at $1O. $$35 Directory B-Tree verification error: $1S. (Proceeding from this error is possible but not recommended. Suggest running IFSScavenger.) $$36 Malformed directory B-Tree record at $1O. (Proceeding from this error is NOT possible. Run IFSScavenger.) $$37 InitFmap failed. $$40 There are two error strings with code $1D $$45 VMem: illegal virtual page $$46 VMem: illegal page type $$47 VMem: can't flush locked page $$48 VMem: lock list full $$50 Malformed XM overlay, probably caused by an assembly-language module that doesn't follow the Bcpl "rules". $$51 An overlay is larger than 1K and would cross an XM bank boundary. Either reorder the overlays or reduce the oversize one. $$52 Overlay malfunction: faulted on overlay that is already present. $$53 Bad overlay call. $$54 FindOverlayFromPn failed. $$55 Too many XM Entry points. Increase numXEP in IfsOverlaysInit. $$56 MakeFree called with negative length. $$60 The Control RAM is broken! Address $1O was $2O $3O, should be $4O $5O. Run DMT or MadTest for further information. $$61 The S-registers don't work! Address $1O was $2O, should be $3O. Run MadTest for further information. $$70 Group name table is full. $$71 Group name is already in use. $$72 Illegal group number. $$73 Illegal group name. $$100 Impossible case in LookupFile. $$101 OFT at $1O is full. $$102 OFT in file system $1O is screwed up. $$103 ReturnFrom(CallersFrame()) returned! $$104 Undefined open mode. $$105 Existing filename '$1S' has illegal format. $$106 Directory entry is not 'TypeDIF' $$107 Directory entry already exists. $$108 DeleteKey failed - can't delete dir entry. $$109 File is not a DIF. $$110 Can't find DIF. $$111 TFSNewDisk failed. $$112 Can't find 'IFS.Dir'. $$113 Can't enter system file. $$114 DestroyOFT failed. $$115 Can't create essential file. $$116 Illegal combination of lookup control parameters. $$117 Attempt to open file using invalid FD. $$118 DIF is malformed or unreadable. $$119 Attempt to access directory without locking it. $$120 Malformed Directory Record. $$121 TFSInit failed on freshly-initialized file system. $$122 Requested drive is not on-line. $$123 Can't insert new DIF entry in empty cache. $$201 11 Malformed filename. $$202 11 Illegal character in filename. $$203 11 Illegal use of "*". $$204 14 Illegal version number. $$205 11 Filename too long. $$206 101 Not allowed to access Directory Information File. $$207 100 File not found. $$208 101 File is protected - access denied. $$209 111 File open in conflicting way - file busy. $$210 12 No such directory. $$211 104 Page allocation exceeded. $$212 104 The file server's disk is full! $$213 103 CreateDiskStream failed - disk error? $$214 112 Rename "to" file already exists. $$215 101 File is undeletable. $$216 20 Incorrect user-name. $$217 21 Incorrect user-password. $$218 20 Can't login as files-only directory. $$219 23 Incorrect connect-name. $$220 24 Incorrect connect-password. $$221 20 I never heard of that user-name, and I can't talk to Grapevine. $$222 103 File server disk error -- inform IFS administrator. $$223 2 User-name and password required. $$300 Uncaught BSP stream error in Telnet, code = $1D. $$301 Mailbox is not empty; it will be deleted automatically when next read. $$400 CreateFD failed unexpectedly in BackupFile, code = $1D. $$401 LookupFD failed unexpectedly in BackupFile, code = $1D. $$402 CreateIFSFile failed unexpectedly in BackupFile, code = $1D. $$403 LookupIFSFile failed unexpectedly in BackupFile, code = $1D. $$404 DeleteFileFromFD failed unexpectedly in BackupFile, code = $1D. $$405 File system is not of type 'backup'. $$425 CreateFD failed unexpectedly in RestoreFile, code = $1D. $$426 LookupFD failed unexpectedly in RestoreFile, code = $1D. $$427 Cannot restore "no-backup" file. $$428 File already exists in primary file system and is newer. $$451 Backup completed successfully. $$452 File busy - can't back it up now. $$453 Backup file system is full. $$454 Backup system halted externally. $$455 Backup not required. $$456 Unexpectedly failed to back up file. $$500 Can't open '$1S' on the scratch disk. $$501 cmdQ screwed up. $$502 Impossible PLME.type. $$503 The disk being scavenged is full, and I need to assign a page! $$504 CreateDiskStream failed for '$1S'. $$505 Unrecoverable disk Error. $$506 Can't open '$1S' on the scavengee. $$507 LPTE is too big. $$508 Malformed LPTE. $$509 UpdateRecord failed for an existing record. $$510 FreeQ empty. $$601 102 file type is Binary not Text $$602 Warning: $S may be type Text $$603 102 CRLF conversion not supported $$604 102 requested byte size not equal to file byte size $$605 102 TYPE property required $$606 102 BYTE-SIZE property required $$607 101 $S not retrieved: $P $$608 1 Unimplemented command $$609 107 not stored: $P $$610 110 BSPReadBlock failed $$611 110 BSPWriteBlock failed $$612 Caution: file $S is damaged $$700 0 Unspecified failure. $$701 1 Can't locate mailbox. $$702 2 Mailbox isn't local, and forwarding is disabled. $$704 4 Unable to convert registry name to address. $$705 Undeliverable after 48 hours. $$706 4 Registry does not resolve to MTP socket. $$707 4 Name does not contain a registry. $$708 4 Mail forwarding loop: Grapevine says mailbox is here, but it isn't. $$710 40 MLBX property required. $$711 41 Mailbox must be User-Name or Connect-Name. $$712 41 No Mailbox by that name here. $$713 110 Mail not retrieved: $P. $$714 110 Mail not stored: $P. $$715 110 Sender property missing. $$716 3 Mail-server Retrieve not permitted. $$717 40 No valid recipients for message. $$718 110 Message has zero length. $$719 100 Registry is not local. $$720 Bad MH.seal in msg $1O. (Proceeding will delete the offending file.) $$721 Unexpected EOF in Header area of msg $1O. (Proceeding will delete the offending file.) $$722 Unexpected EOF in Block area of msg $1O. (Proceeding is not possible.) $$723 Unexpected EOF in Text area of msg $1O. (Proceeding is not possible.) $$724 Can't find mlbx index $1D in msg $2O. (Proceeding will ignore the mailbox exception.) $$725 FPROP area in leader page $1O overflowed. $$726 Can't delete mailbox file. $$800 Name server not available $$801 Name malformed $$803 Inconsistent name expression $$804 Address not found $$805 Attempt to insert duplicate record in net directory tree $$901 Press printing request pending $$902 Press printing request completed $$903 Press printing request removed by user $$904 No response from Press printing server within 8 hours $$905 not a Press-format file. $$1010 Leaf operation not implemented $$1011 Bad leaf handle $$1012 Leaf file too long $$1013 Illegal leaf truncate $$1014 Leaf file has no last FA hint $$1015 Illegal leaf read $$1016 Illegal leaf write $$1020 Bad old page number in FD $$1021 Attempt to access a file with no leaf file map $$1022 Malformed leaf file map. $$1023 Broken leaf queue $$1024 Broken leaf vmem queue $$1025 Wrong page size for leaf vmem $$1026 Leaf hash zero $$1027 Leaf vmem page moved $$1028 Leaf vmem full $$1029 Leaf hash table full $$1030 Can't purge leaf vmem file $$1031 Multiple page request to leaf vmem $$1032 Leaf vmem entry in bad state $$1033 Attempt to write a non-dirty leaf vmem page $$1034 Leaf hash table broken $$1035 Leaf virtual pbi page number wrong $$1040 Unknown sequin error $$1041 Sequin count anomaly $$1042 Leaf virtual pbi out of sequence $$1043 Sequin output virtual pbi vector full $$1060 Leaf virtual pbi preallocation broken $$1061 Malformed leaf virtual pbi page $$1062 Attempt to access non-existant leaf virtual pbi $$1064 Attempt to unlock a leaf virtual pbi that was not locked $$1066 No free leaf virtual pbi pages $$1067 Leaf virtual pbi backward chain error $$1068 Error while looking up "VPBI.swap" $$1069 Can't open "VPBI.swap" $$1070 Can't create "VPBI.swap" $$1071 Attempt to access leaf virtual pbi page zero $$1072 Attempt to free non-allocated leaf virtual pbi page $$1080 Leaf answer too long $$1100 Unknown command $$1101 Protocol error: no disk specified $$1102 Protocol error: no disk params $$1103 I'm ready for your disk $$1104 Here comes the disk $$1105 Login/connect ok $$1106 File is not in CopyDisk format $$2250 Name not found $$2252 No name lookup server responded $$2253 Can't get there from here $$