0 $$100 Illegal PD file: Wrong password. (PDPrint) $$101 Illegal PD file: Wrong version number. (PDPrint) $$102 PD file and device disagree about sResolution. If you continue, the device's assumptions will be honored. (PDPrint) $$103 PD file and device disagree about fResolution. If you continue, the device's assumptions will be honored. (PDPrint) $$104 PD file specifies a larger imageSSize than device can handle. (PDPrint) $$105 PD file specifies a larger imageFSize than device can handle. (PDPrint) $$106 The Bits file is not big enough to contain the raster for a single page of output. (PDPrint) $$107 PDTrap called -- reason not immediately available. (PDPrint) $$108 Scream called -- reason not immediately available. (PDPrint) $$110 Not enough core for a request. (PDPrint) $$111 FSTrap free storage breakpoint. (PDPrint) $$120 SwappedOut called. (PDPrint) $$200 Cannot find the PD file you request: $1S. (PDInit) $$201 Illegal command line: $1S is not a command word. (PDInit) $$202 Illegal command line: number expected. (PDInit) $$203 Illegal command line: must specify a PD file for the operation you request. (PDInit) $$204 Too many "relocatable" statics. (PDInit) $$207 Illegal command line: name of PD file expected. (PDInit) $$210 Cannot load the RAM properly. The machine may not have a RAM, or may have too old a constant memory. (PDInit) $$250 Necessary file missing. (PDInstall) $$251 PDPrint.Run overlay structure appears to be incorrect. (PDInstall) $$253 Too many defaults -- recompile. (PDInstall) $$280 Illegal file index. (PDInstallUtils) $$300 Load size too big; must be < 64,000 if extended memory available or < 32,000 if not. (Convert) $$301 Illegal PD file: Color or mask is specified before startImage. (Convert) $$302 Internal error: bad format leftover list. (Convert) $$303 Illegal PD file: startImage command encountered while image generation in progress, i.e., before end of page. (Convert) $$304 Illegal PD file: nBands and/or passBands out of range in startImage command. (Convert) $$305 Illegal PD file: page requires more bands than will fit in imageSSize specified in the herald. (Convert) $$306 Illegal PD file: page requires more bits on a scan line than will fit in imageFSize specified in the herald. (Convert) $$307 PD file specifies longer scan-line than device can accommodate. (Convert) $$308 deviceCommand is not implemented. You may continue from this error to interpret the rest of the file. (Convert) $$309 storeLoad or setColorTile has load address that is too big. (Convert) $$310 setPriority specifies a priority that is less than the previous priority. (Convert) $$311 Hit scan break-point (Convert) $$400 Trying to write a read-only file. (Files) $$401 Internal inconsistency about disk structures and files. (Files) $$402 Too large a transfer for file package. (Files) $$403 A scratch file is not large enough to handle the PD file you are trying to print. You can perhaps request that fewer pages be printed. [[The temporary file's "name" is $1D. The file name correspondance is: 0=.Bits, 1=.Scratch, 2=.LO1, 3=.LO2, 4=.Meter, 5=PDPrint.Run, 1000=.PD ]] (Files) $$404 Bfs/Tfs error while operating on a disk file. (Files) $$500 Trying to WindowInit a non-existent file (Window) $$600 Illegal PD file: mask command out of range. (ConvertMask) $$601 Illegal PD file: the file contains a maskRunGroup or maskSamples or colorSamples that has leftovers. (ConvertMask) $$602 Illegal PD file: high-order load address bits of maskSampleRef or maskRunGroupRef is non-zero. (ConvertMask) $$603 MaskError called: mangled leftover lists. (ConvertMask) $$604 Mask S dimension error: sMin+sSize overflows. (ConvertMask) $$605 Illegal PD file: mask lies entirely to the left of the band in which it is entered. (ConvertMask) $$606 Illegal PD file: mask lies entirely to the right of the band in which it is entered. (ConvertMask) $$700 Initialization error. (ConvertPut) $$701 Illegal PD file: f dimensions lie outside limits set by startImage command. (ConvertPut) $$702 maskSamples curiously too big. (ConvertPut) $$800 Bad colorType. (ConvertColor) $$801 Illegal PD file: fSize or sSize for tile is zero. (ConvertColor) $$900 Bug: XM routine called even though machine does not have XM. (ConvertUtils) $$901 Bug: XM read/write block count too large. (ConvertUtils) $$1100 Installation error: bit clock frequency too high. (PrintOrbitInit) $$1101 Bug: (PrintOrbitInit) $$1102 Dover signal band incorrect (PrintOrbitInit) $$1700 Problem with Slot printer -- not ready. (Print) $$1701 No core for display. (Print) $$1702 Versatec: scan-line length inconsistency. (Print) $$2300 Not enough space for print disk buffers. Futile to continue. (PrintDisk) $$2301 Bug: Generic print disk routine called. (PrintDisk) $$2400 Bug: dcb's too small. (PrintDisk31) $$3100 Slot error: Hardware not responding. $$3101 Slot error: Printer not ready. $$3102 Slot error: Paper jam. $$3103 Slot error: Paper low. $$3104 Slot error: Unexplained malfunction. $$3105 Slot error: Disk got behind. $$3106 Slot error: Timeout exceeded. $$3410 Dover error: Check paper tray. $$3420 Dover error: Paper feed jam. $$3421 Dover error: Lost engine power. $$3422 Dover error: Paper on drum. $$3423 Dover error: Startup jam. $$3424 Dover error: Paper on fuser roll. $$3425 Dover error: Paper on drum. $$3401 Dover error: Fuser not warm. $$3426 Dover error: Engine now powered up. $$3427 Dover error: Unexplained malfunction. $$3402 Sequoia error: Fuser not warm. $$3411 Sequoia error: Check paper tray. $$3430 Sequoia error: Jam. $$3431 Sequoia error: Unexplained malfunction. $$3403 Sequoia error: Not ready. $$3413 Pimlico/Puffin error: Low paper. $$3450 Pimlico/Puffin error: M6800 is in wait state. $$3451 Pimlico/Puffin error: Command sync error. $$3452 Pimlico/Puffin error: X missed. $$3453 Pimlico/Puffin error: Malfunction memory set. $$3454 Pimlico/Puffin error: FIRE in fuser. $$3455 Pimlico/Puffin error: Transport A. $$3456 Pimlico/Puffin error: Paper grip. $$3457 Pimlico/Puffin error: Transport B. $$3458 Pimlico/Puffin error: Fuser interlock open. $$3459 Pimlico/Puffin error: Bottom tray interlock open. $$3460 Pimlico/Puffin error: Transport C jam. $$3461 Pimlico/Puffin error: Front door open. $$3462 Pimlico/Puffin error: Too many toner calls. $$3463 Pimlico/Puffin error: Functional interlock open. $$3406 Pimlico/Puffin error: Not yet warmed up. $$3414 Pimlico/Puffin error: Low paper. $$3464 Pimlico/Puffin error: Bad feed. $$3465 Pimlico/Puffin error: Bad strip. $$3466 Pimlico/Puffin error: Malfunction clearing. $$3467 Pimlico/Puffin error: Illegal print sequence code. $$3468 Pimlico/Puffin error: Illegal print subsequence code. $$3469 Pimlico/Puffin error: T events missed. $$3408 Printer error: something is wrong, but more information is not available. (PrintOrbitHdwFns) $$3418 Orbit timed out. (PrintOrbit) $$3497 Dover error -- sheet never arrived. (PrintOrbit) $$3498 Orbit encountered an invalid band entry. (PrintOrbit) $$3499 Orbit timeout without further evidence of failure. (PrintOrbit) $$3500 Disk got behind during imaging. $$3501 Orbit got behind on this page. (PrintOrbit) $$3502 Orbit aborted the page prematurely. (PrintOrbit) $$3503 Leftover table overflow. Should not happen. (PrintOrbit) $$3587 Error: PDPrint is installed to use a standard color printing queue, and the feed/strip specifications of the PD file being printed do not conform to that standard queue. (PrintOrbit) $$3588 Error: PDPrint is installed to use a standard color printing queue, and the toner specifications of the PD file being printed do not conform to that standard queue. (PrintOrbit) $$3589 Error: PDPrint is installed to use a standard color printing queue, and the PD file being printed does not conform to that standard queue. (PrintOrbit) $$3590 Error: Too many pages and/or copies requested, causing the printer's action queue to fill. Limit pages*copies to 40. (PrintOrbit) $$3591 Error: PD file requests black toner, but printer does not have it. (PrintOrbit) $$3592 Hardware problem: page sync did not go away. (PrintOrbit) $$