// Hardwired8Line.config -- 8-line configuration for DLSTest
// Last modified June 20, 1982  11:01 AM by Taft

// Syntax of DLS configuration file:
// One or more entries, each terminated by return.
//  ::=   | // 
//  ::= 
//  ::=  |  
//  ::=  |  |  |  |
//		 |  |  |  |
//		 |  | 
//  ::= Unused | Hardwired | DataSet | Telenet |
//		Dialler 
//  ::= Control 
//  ::= Host 
//  ::= Baud 
//  ::= Type 	// Tenex terminal type
//  ::= Length 		// Lines/page
//  ::= Width 		// Chars/line
//  ::= DialOut  
//  ::= Stop 1 | Stop 2
//  ::= Loop 			// Implemented only in ChollaDLS
//  ::= CRQ | DP | NB1 | NB2 | NB4 | NB8
//  ::= DialOutOnly | NoPad

// Each entry must contain a , and entries with  of
// DataSet or Telenet must contain a .

// If a  is specified, the line will run at that fixed rate.
// Normally  is omitted, and speed determination is performed
// at connection time.

// Dial-out lines, as well as having a  attribute, also
// have a  attribute with two arguments:
//	Modem address, i.e., Vadic card cage slot number (1-16) in the
//		cage that has the dialler.
//	Modem type: 1 = 103-compatible modem, 0 = other type of modem

// There are 6 lines that control the dialler itself; each is declared by
// a "Dialler " entry, where the argument is the name
// of the output signal being controlled.  Some of the lines also have
// input signals connected to them; the correspondence is:
//	output:	CRQ	DP	NB1	NB2	NB4	NB8
//	input:	PND	ACR	DSS	--	--	--

// DialOutOnly means that the line is controlled exclusively from the network
// side; input from the line is ignored when the line is idle.

00 Hardwired
01 Hardwired
02 Hardwired
03 Hardwired
04 Hardwired
05 Hardwired
06 Hardwired
07 Hardwired